Percent Change vs. Percent Difference: Which Formula Should You Use? | EverydayCalcSkip to main content
everydaycalc.

Find calculators and file viewers

Press Esc to close · / or Ctrl+K to open

Home›Guides›Percent Change vs. Percent Difference: Which Formula Should You Use?
EXPLAINED WITH EXAMPLES

Percent Change vs. Percent Difference: Which Formula Should You Use?

If a price rises from $80 to $100, did it change by 20%, 25%, or 22.2%? All three numbers show up in online calculations—but they answer different questions.

SEE THE DIFFERENCE

The same difference of 20, three distinct answers

The denominator changes with the question you ask. Each link opens the calculator with these example values filled in.

Increase: 80 → 100

+25%

(100 − 80) ÷ 80 × 100

Starting value 80 is the denominator

Calculate this increase

Decrease: 100 → 80

-20%

(80 − 100) ÷ 100 × 100

Starting value 100 is the denominator

Calculate this decrease

Symmetric difference: 80 and 100

≈ 22.22%

|100 − 80| ÷ ((80 + 100) ÷ 2) × 100

Average absolute magnitude 90 is the denominator

Calculate this difference

Zero-denominator rule: Percent change is undefined when the starting value is 0 (0 → 100). Symmetric percent difference is undefined when both values are 0 (0 vs 0). Neither case should be reported as 0%.

For other values, visit the Percentage Calculator. For the final price after a discount and tax, use the Discount Calculator.

1. Use percent change when there is a before and after

Percent change = (new value − original value) ÷ |original value| × 100. Going from 80 to 100 means (100 − 80) ÷ 80 × 100 = +25%. The original value is the denominator. If the starting price was 100 and the new price was 80, the answer is −20%, not −25%.

Key point

The same 20-unit distance does not mean the same percent change in both directions.

2. Use percent difference when neither value is the starting point

Percent difference = |A − B| ÷ ((|A| + |B|) ÷ 2) × 100, for values whose absolute magnitudes have a nonzero mean. Comparing 80 and 100 gives 20 ÷ 90 × 100 ≈ 22.22%. Swapping A and B does not change the answer. This comparison is useful for two independent measurements, not for describing a price increase over time.

Key point

For data near zero or values spanning positive and negative numbers, inspect the definition before interpreting a large percent difference.

3. The discount and recovery trap

A 20% discount on $100 produces $80. To get back to $100 from $80, the price must increase by 25%. Similarly, a 50% investment loss requires a 100% gain on the reduced balance to recover, before considering costs. Percentages are relative to their own starting amounts, not interchangeable absolute differences.

4. Enter the figures correctly

In the Percentage Calculator choose “Percent change from X to Y” to measure a transition from X to Y. Choose “Percent difference between X and Y” when neither quantity is the baseline. To estimate a final price after a discount and any tax, use the Discount Calculator instead. For revenue versus cost, the Profit Margin Calculator uses its own separate denominator.

Frequently asked questions

Can a 20% decrease be reversed by a 20% increase?

No. A 20% decrease changes 100 to 80; recovering from 80 to 100 is a 25% increase.

What if the original value is zero?

Ordinary percent change cannot divide by a zero baseline. Report the absolute change or choose a different metric.

Is percent difference always the right way to compare two prices?

Not necessarily. If one is the old price and the other is the new price, percent change usually communicates the decision better.

Calculations run in your browser. This guide is general educational information, not individualized financial, medical or legal advice.