Lumber Cut List & Kerf Layout Planner
Pack six distinct cut lengths into stock bars with kerf, optional end trim, estimated cost and a downloadable per-board work plan.
YOUR SHORTCUTS
Continue where you left off
Recently used
Your favorites
These shortcuts remember only calculator names on this device, not the values you enter.
Stock length, piece cut lengths and saw kerf
Schematic only · not to scale. Enter your actual measurements below; the diagram explains which dimensions to take.
Lumber Cut List & Kerf Layout Planner
View complete schedule
ⓘ Calculated locally in your browser. Results depend on the values and units you enter.
Stock-board cut layout
Compares two packing strategies and checks small projects with a bounded exact minimum-board search. End trims, kerf, reusable remnants and stock cost are included. Unproven plans are labeled approximate.
Reading measurements…
Complete wood cut list — field worksheet
EverydayCalc · all stock boards · dimensions in mm
| Stock # | Cut order and piece lengths (mm) | Saw kerf (mm) | End trim (mm) | Offcut (mm) | Reuse review |
|---|
Units: mm. Dimension-scaled reference layout. Check defects, cutting order, remnant quality, safety and real stock. Project files remain on your device.
Field work orders · cut-off checklist
Name and save a cutting job on this device, then mark completed pieces. Resume it offline on the same device.
Save a work order to enable the completion checklist.
A checked item records your work, not a verified safe cutting order. Changing dimensions detaches the saved work order instead of altering its progress.
How this calculator works
A stock board loses the entered trim at EACH end, then each detached part conservatively consumes its cut length plus one kerf. The planner evaluates first-fit and best-fit descending, and attempts a bounded exact minimum-stock search for up to 22 pieces (or uses a mathematical lower bound). A green proven-optimal label is shown only when certified by the search; other outputs are heuristic. Includes reusable remnant threshold, stock purchase cost, scaled layout and local CSV. No defect/knots/grain/safe saw sequencing or globally optimal remnant value is assumed. Planning quantities only; check real stock size, load-bearing design, applicable codes and fastening recommendations.
Worked example
Engine-checked example
This example uses the values shown below, not your current entries.
- Stock board length (mm)
- 2400
- Saw kerf per detached cut (mm)
- 3
- Part A cut length (mm)
- 900
- Part A quantity
- 4
- Part B cut length (mm)
- 650
- Part B quantity
- 3
- Part C cut length (mm)
- 420
- Part C quantity
- 3
- Part D cut length (mm)
- 320
- Part D quantity
- 0
- Part E cut length (mm)
- 250
- Part E quantity
- 0
- Part F cut length (mm)
- 160
- Part F quantity
- 0
- Trim allowance at EACH stock end (mm)
- 0
- Reusable offcut minimum length (mm)
- 300
- Price per stock board (your currency)
- 0
Frequently asked questions
Where is the saw kerf applied?
Every detached part is allocated the entered kerf, and the chosen end-trim amount is removed at each stock-board end.
Is the calculated stock count always globally optimal?
No. The tool compares packing heuristics and tries a bounded exact search for smaller projects. Only a proved result receives an optimality label.
Will the diagram provide a safe cutting sequence?
No. The drawing is a planning layout. Defects, grain, clamping, blade safety and a practical saw sequence still require workshop judgment.
Results are informational and assume the stated inputs and formulas. Double-check critical financial or engineering decisions with a qualified professional.
Was this calculator helpful?
Your feedback helps you keep track of useful tools on this device.
Your selection stays in this browser. No public vote count is shown.
Prefer EverydayCalc on Google
Opens Google source preferences. Availability and placement are determined by Google; this does not guarantee higher rankings.