Stair Riser & Tread Layout Calculator
Distribute total floor-to-floor rise into uniform risers and count treads below an upper landing.
YOUR SHORTCUTS
Continue where you left off
Recently used
Your favorites
These shortcuts remember only calculator names on this device, not the values you enter.
Finish-to-finish floor rise and uniform risers
Schematic only · not to scale. Enter your actual measurements below; the diagram explains which dimensions to take.
Stair Riser & Tread Layout Calculator
View complete schedule
ⓘ Calculated locally in your browser. Results depend on the values and units you enter.
Interactive 3D stair layout
Change floor-to-floor rise, maximum riser and tread depth to update the 3D geometry.
3D graphics load only on request.
Drag to rotate · pinch to zoom / two-finger pan
Straight-flight layout visualization only. Does not verify stringers, handrails, tread thickness, landings, headroom, local building codes or structural capacity.
How this calculator works
Risers = ceiling(total rise ÷ maximum desired riser). Actual equal riser = total rise / risers. For one straight flight ending at the upper floor, treads = risers − 1 and approximate horizontal run = treads × entered tread depth. No automatic compliance, headroom or landing checks. Planning quantities only; check real stock size, load-bearing design, applicable codes and fastening recommendations.
Formula and reasoning
Number of risers = ceil(finished total rise(mm) / chosen maximum riser(mm)); requires at least two risers. Actual rise per riser and tread count are secondary results.
- 1. Start with the measurementsFinished floor-to-floor rise (mm)2800Chosen maximum riser height (mm)180
- 2. Substitute into the formula
Finished floor-to-floor rise (mm) = 2800 ? Chosen maximum riser height (mm) = 180
- 3. Check the computed answer
Result for the sample inputs
Worked example
Frequently asked questions
What do I measure?
Risers = ceiling(total rise ÷ maximum desired riser). Actual equal riser = total rise / risers. For one straight flight ending at the upper floor, treads = risers − 1 and approximate horizontal run = treads × entered tread depth. No automatic compliance, headroom or landing checks.
Is this a structural design approval?
Planning quantities only; check real stock size, load-bearing design, applicable codes and fastening recommendations.
Results are informational and assume the stated inputs and formulas. Double-check critical financial or engineering decisions with a qualified professional.
Was this calculator helpful?
Your feedback helps you keep track of useful tools on this device.
Your selection stays in this browser. No public vote count is shown.
Prefer EverydayCalc on Google
Opens Google source preferences. Availability and placement are determined by Google; this does not guarantee higher rankings.